UAN28 - UAN30 - UAN32
CONCIME LIQUIDO UAN
LATO PRODUTTIVO
REDDITIZIO - VELOCE - INTELLIGENTE
CONCIME LIQUIDO UAN
IMPIANTO DI PRODUZIONE
PROGETTO INTELLIGENTE CHIAVI IN MANO
CONCIME LIQUIDO UAN
Profitable Production
Mixing urea with water, causes a drop in temperature due to its endothermic reaction. Traditional systems require a hefty 75 kW of heating energy to dissolve urea, whereas our system accomplishes the same with only 15 kW. This results in a lower unit cost and increased profitability.
Fast Production
Each batch in our production takes just about 20 minutes, signifying an efficient and energy-saving process for rapid production. In contrast, conventional systems necessitate a minimum of 2 hours for heating and mixing.
Smart Production
Our automated system precisely controls and mixes urea and water without manual intervention. It continuously monitors and adjusts the percentage of each component in real-time. This dynamic process ensures no wasted batches, saving both time and energy efficiently.
Minimum Manpower
Max 2 staff member is sufficient for our production process. Their responsibilities include loading bags of raw material into the urea hopper, and then they have three hours to monitor the system via the display. After this period, the staff member conducts a quality control check, completing their duties.
Certification
ISO 9001
ISO 13485
ISO 14001
Duty Free
We supply the A.TR file. It means that you will not pay Tax on your border.
PIÙ FORZA
Forniamo una varietà di soluzioni high-tech con il nostro portafoglio diversificato di prodotti.
Produzione UAN COMPLETAMENTE AUTOMATIZZATA
- Trasferisce UREA e AN dalla tramoggia
- Calcola la quantità di acqua necessaria
- Trasferisce l’acqua dal sistema UPW
- Analizza la miscela e continua a mescolare
- Trasferisce l’UAN ai serbatoi di stock
- Nessuno spreco/perdita nei lotti di produzione
- Risparmia tempo, energia e perdita di urea
Dotato di sensori accurati
- Contare o pesare i sacchi di Urea e AN nei nostri Sistemi di Produzione non è necessario.
- I sensori trasferiscono automaticamente l’urea e l’AN al miscelatore secondo necessità.
Design UX/UI intuitivo
Accesso e intervento online
Our Models
UAN 4800
CAPACITY: 1 m3/h
ELECTRIC: 380 V – 40 kW
NEEDED AREA: 350 m2
UAN 7200
CAPACITY: 2 m3/h
ELECTRIC: 380 V – 45 kW
NEEDED AREA: 400 m2
UAN 9600
CAPACITY: 3 m3/h
ELECTRIC: 380 V – 60 kW
NEEDED AREA: 450 m2
ULTRA PURIFICAZIONE DELL'ACQUA
BASATO SULLA ISO 22241
BASATO SULLA ISO 22241
TRIPLO PASSAGGIO RO LATO
REGOLABILE CON TUTTE LE QUALITÀ DELL'ACQUA
| Characteristics | Unit | Drinking Water (ISO: 10500) | Deionized Water (ISO 22241) |
|---|---|---|---|
| Aluminum | mg/l Max | 0.03 | 0.5 |
| Calcium | mg/l Max | 75 | 0.5 |
| Iron | mg/l Max | 0.3 | 0.5 |
| Magnesium | mg/l Max | 30 | 0.5 |
| Conductivity | μS/m | 5,000-50,000 | 5.5 |
In che modo l’UAN influisce sulla crescita della pianta?
Il fertilizzante UAN (nitrato di urea-ammonio) contiene tipicamente due tipi principali di azoto:
1. Azoto ammoniacale: l’azoto ammoniacale è sotto forma di ioni ammonio (NH4+). È immediatamente disponibile per le piante dopo l’applicazione e può essere facilmente assorbito dalle radici delle piante. L’azoto ammoniacale ha una carica positiva e aderisce alle particelle del terreno, riducendo il rischio di lisciviazione e rendendolo relativamente stabile nel terreno.
2. Azoto ureico: l’urea è un componente fertilizzante azotato solido del fertilizzante UAN. Quando applicata al terreno, l’urea subisce una reazione chimica chiamata idrolisi, convertendola in ioni ammonio e bicarbonato. Gli ioni ammonio formati dall’idrolisi dell’urea diventano disponibili per le piante nel tempo.
Pertanto, il fertilizzante UAN contiene sia azoto ammonico che azoto ureico, fornendo un apporto equilibrato di azoto alle colture. L’azoto ammoniacale offre una disponibilità immediata, mentre l’azoto ureico fornisce un rilascio graduale e prolungato di azoto nel tempo, migliorando l’efficienza dei nutrienti e l’utilizzo da parte delle piante.
CONFRONTO I VARI TIPI DI UAN
| UAN GRADE | 28 | 30 | 32 | Unit |
|---|---|---|---|---|
| Urea | 30 | 33 | 35 | % weight |
| Ammonium Nitrate | 40 | 42 | 45 | % weight |
| Water | 30 | 25 | 20 | % weight |
| Density (20℃) | 1.28 | 1.30 | 1.32 | t/m³ |
| Salt precipitation temperature | -18 | -10 | -2 | ℃ |
CONTENUTO DELL'UAN 32
| GUARANTEED CONTENT | Mass (w/w)% |
|---|---|
| Ammonia Nitrogen (N-NH3) | 8 |
| Nitrate Nitrogen (N-NO3) | 8 |
| Urea Nitrogen (N-NH2) | 16 |
| Trace Elements | – |
| Water-soluble BORON (B) | 0.01 |
| Water-soluble COPPER (Cu) | 0.02 |
| Water-soluble IRON (Fe) | 0.02 |
| Water-soluble MANGANE (Mn) | 0.01 |
| Water soluble MOLYBDENE (Mo) | 0.001 |
| Water soluble ZINC (Zn) | 0.002 |
TABELLA APPLICAZIONI UAN 32
| HERB | APPLICATION TIME | FROM LEAF cc/decare (with 100 liters of water) | WITHOUT DRIP IRRIGATION liter/decare (with 1 ton of water) |
|---|---|---|---|
| Tomato-Pepper Eggplant-Cucumber | From the seedling planting to the growing period | 250-300 | 3-4 |
| Watermelon-Melon-Pumpkin | From the seedling planting to the growing period | 250-300 | 3-4 |
| Strawberry | During the development period | 250-300 | 3-4 |
| Vineyard-Kiwi | 1st application: Before flowering 2nd application: After fruit set 3rd application: 10-15 days after the second application | 250-300 | 3-4 |
| Banana | During the development period | 250-300 | 3-4 |
| Citrus | 1st application: Before flowering 2nd application: After fruit set 3rd and 4th applications: Until fruit ripens | 250-300 | 3-4 |
| Cherry-Cherry-Peach Apricot-Plum | In early development | 250-300 | 3-4 |
| Apple-Pear-Quince | In early development | 250-300 | 3-4 |
| Olive | In early development | 250-300 | 3-4 |
| Corn-Sunflower | From the period when the plant height is 15-20 cm | 300-350 | 3-4 |
| Potato-S. Beet Carrot | From the exit | 250-300 | 3-4 |
| Wheat-Barley-Paddy | From the beginning of brotherhood | 350-400 | – |
| Cotton | From the period when the plant height is 15-20 cm | 300-350 | 3-4 |
| Beans-Chickpeas Lentils | From the period when the plant height is 15-20 cm | 300-350 | 3-4 |
| Hazelnut-Walnut-Pistachio | In early development | 250-300 | 3-4 |
| Vegetables that are eaten with leaves (Lettuce, Curly, Cabbage, etc.) | During the development period | 250-300 | 3-4 |
| Onion-Garlic | During the development period | 250-300 | 3-4 |
| Green areas- Ornamental Plants | During the development period | 300-400 | 3-4 |
| Foliar application doses are applied at intervals of 10-15 days, and drip irrigation doses are applied weekly. |
Reach out to us and join the movement toward a greener and more prosperous tomorrow. Let’s work together to create smart facilities that leave a positive legacy for future generations. Together, we can turn dreams into reality and make a profound difference.
Company
- About Atmosfer
- Contact
- Portfolio
- Career
- Privacy Policy
